ArbinaHQ/qrcode-reader-hardware
8
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
master
qrcode-reader-hardware/main_prog/Drivers/BSP/vl6180/vl6180_api.c
Mysteo91 0b2cdbc8ba ---vl6180dr
2023-07-31 10:42:03 +03:00

2367 lines
66 KiB
C
Raw Permalink Blame History

/*******************************************************************************
Copyright <20> 2019, STMicroelectronics International N.V.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of STMicroelectronics nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
********************************************************************************/
#include "vl6180_api.h"
#define VL6180_9to7Conv(x) (x)
/* TODO when set all "cached" value with "default init" are updated after init from register read back */
#define REFRESH_CACHED_DATA_AFTER_INIT 1
#define IsValidGPIOFunction(x) ((x) == GPIOx_SELECT_GPIO_INTERRUPT_OUTPUT || (x) == GPIOx_SELECT_OFF)
/** default value ECE factor Molecular */
#define DEF_ECE_FACTOR_M 85
/** default value ECE factor Denominator */
#define DEF_ECE_FACTOR_D 100
/** default value for DMAX Enable */
#define DEF_DMAX_ENABLE 1
/** default ambient tuning factor %x1000 */
#define DEF_AMBIENT_TUNING 80
#define DEF_CROSS_TALK_VALID_HEIGHT_VALUE 20
#if VL6180_SINGLE_DEVICE_DRIVER
extern struct VL6180DevData_t SingleVL6180DevData;
#define VL6180DevDataGet(dev, field) (SingleVL6180DevData.field)
#define VL6180DevDataSet(dev, field, data) SingleVL6180DevData.field = (data)
#endif
#define LUXRES_FIX_PREC 8
#define GAIN_FIX_PREC 8 /* ! if not sme as LUX_PREC then :( adjust GetLux */
#define AN_GAIN_MULT (1 << GAIN_FIX_PREC)
static int32_t _GetAveTotalTime(VL6180Dev_t dev);
static int VL6180_RangeSetEarlyConvergenceEestimateThreshold(VL6180Dev_t dev);
/**
* ScalerLookUP scaling factor-1 to register #RANGE_SCALER lookup
*/
static const uint16_t ScalerLookUP[] ROMABLE_DATA = {253, 127, 84}; /* lookup table for scaling->scalar 1x2x 3x */
/**
* scaling factor to Upper limit look up
*/
static const uint16_t UpperLimitLookUP[] ROMABLE_DATA = {185, 370, 580}; /* lookup table for scaling->limit 1x2x3x */
#if VL6180_RANGE_STATUS_ERRSTRING
const char *ROMABLE_DATA VL6180_RangeStatusErrString[] = {
"No Error",
"VCSEL Continuity Test",
"VCSEL Watchdog Test",
"VCSEL Watchdog",
"PLL1 Lock",
"PLL2 Lock",
"Early Convergence Estimate",
"Max Convergence",
"No Target Ignore",
"Not used 9",
"Not used 10",
"Max Signal To Noise Ratio",
"Raw Ranging Algo Underflow",
"Raw Ranging Algo Overflow",
"Ranging Algo Underflow",
"Ranging Algo Overflow",
"Filtered by post processing (WAF)",
"Ranging filtering (WAF) on-going",
"Data not ready",
};
const char *VL6180_RangeGetStatusErrString(uint8_t RangeErrCode)
{
if (RangeErrCode > sizeof(VL6180_RangeStatusErrString) / sizeof(VL6180_RangeStatusErrString[0]))
return NULL;
return VL6180_RangeStatusErrString[RangeErrCode];
}
#endif
#if VL6180_UPSCALE_SUPPORT == 1
#define _GetUpscale(dev, ...) 1
#define _SetUpscale(...) -1
#define DEF_UPSCALE 1
#elif VL6180_UPSCALE_SUPPORT == 2
#define _GetUpscale(dev, ...) 2
#define _SetUpscale(...)
#define DEF_UPSCALE 2
#elif VL6180_UPSCALE_SUPPORT == 3
#define _GetUpscale(dev, ...) 3
#define _SetUpscale(...)
#define DEF_UPSCALE 3
#else
#define DEF_UPSCALE (-(VL6180_UPSCALE_SUPPORT))
#define _GetUpscale(dev, ...) VL6180DevDataGet(dev, UpscaleFactor)
#define _SetUpscale(dev, Scaling) VL6180DevDataSet(dev, UpscaleFactor, Scaling)
#endif
#if VL6180_SINGLE_DEVICE_DRIVER
/**
* the unique driver data When single device driver is active
*/
struct VL6180DevData_t VL6180_DEV_DATA_ATTR SingleVL6180DevData = {
.EceFactorM = DEF_ECE_FACTOR_M,
.EceFactorD = DEF_ECE_FACTOR_D,
#ifdef VL6180_HAVE_UPSCALE_DATA
.UpscaleFactor = DEF_UPSCALE,
#endif
#ifdef VL6180_HAVE_DMAX_RANGING
.DMaxEnable = DEF_DMAX_ENABLE,
#endif
};
#endif /* VL6180_SINGLE_DEVICE_DRIVER */
#define Fix7_2_KCPs(x) ((((uint32_t)(x))*1000)>>7)
#if VL6180_WRAP_AROUND_FILTER_SUPPORT || VL6180_HAVE_DMAX_RANGING
static int _GetRateResult(VL6180Dev_t dev, VL6180_RangeData_t *pRangeData);
#endif
#if VL6180_WRAP_AROUND_FILTER_SUPPORT
static int _filter_Init(VL6180Dev_t dev);
static int _filter_GetResult(VL6180Dev_t dev, VL6180_RangeData_t *pData);
#define _IsWrapArroundActive(dev) VL6180DevDataGet(dev, WrapAroundFilterActive)
#else
#define _IsWrapArroundActive(dev) 0
#endif
#if VL6180_HAVE_DMAX_RANGING
void _DMax_OneTimeInit(VL6180Dev_t dev);
static int _DMax_InitData(VL6180Dev_t dev);
static int _DMax_Compute(VL6180Dev_t dev, VL6180_RangeData_t *pRange);
#define _IsDMaxActive(dev) VL6180DevDataGet(dev, DMaxEnable)
#else
#define _DMax_InitData(...) 0 /* success */
#define _DMax_OneTimeInit(...) (void)0
#define _IsDMaxActive(...) 0
#endif
static int VL6180_RangeStaticInit(VL6180Dev_t dev);
static int VL6180_UpscaleStaticInit(VL6180Dev_t dev);
int VL6180_WaitDeviceBooted(VL6180Dev_t dev)
{
uint8_t FreshOutReset;
int status;
LOG_FUNCTION_START("");
do {
status = VL6180_RdByte(dev, SYSTEM_FRESH_OUT_OF_RESET, &FreshOutReset);
} while (FreshOutReset != 1 && status == 0);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_InitData(VL6180Dev_t dev)
{
int status, dmax_status ;
int8_t offset;
uint8_t FreshOutReset;
uint32_t CalValue;
uint16_t u16;
uint32_t XTalkCompRate_KCps;
LOG_FUNCTION_START("");
VL6180DevDataSet(dev, EceFactorM, DEF_ECE_FACTOR_M);
VL6180DevDataSet(dev, EceFactorD, DEF_ECE_FACTOR_D);
VL6180DevDataSet(dev, RangeIgnore.Enabled, 0);
#ifdef VL6180_HAVE_UPSCALE_DATA
VL6180DevDataSet(dev, UpscaleFactor, DEF_UPSCALE);
#endif
#ifdef VL6180_HAVE_WRAP_AROUND_DATA
VL6180DevDataSet(dev, WrapAroundFilterActive, (VL6180_WRAP_AROUND_FILTER_SUPPORT > 0));
VL6180DevDataSet(dev, DMaxEnable, DEF_DMAX_ENABLE);
#endif
_DMax_OneTimeInit(dev);
do {
/* backup offset initial value from nvm these must be done prior any over call that use offset */
status = VL6180_RdByte(dev, SYSRANGE_PART_TO_PART_RANGE_OFFSET, (uint8_t *)&offset);
if (status) {
break;
}
VL6180DevDataSet(dev, Part2PartOffsetNVM, offset);
status = VL6180_RdDWord(dev, SYSRANGE_RANGE_IGNORE_THRESHOLD, &CalValue);
if (status) {
break;
}
if ((CalValue&0xFFFF0000) == 0) {
CalValue = 0x00CE03F8;
}
VL6180DevDataSet(dev, Part2PartAmbNVM, CalValue);
status = VL6180_RdWord(dev, SYSRANGE_CROSSTALK_COMPENSATION_RATE , &u16);
if (status) {
break;
}
XTalkCompRate_KCps = Fix7_2_KCPs(u16);
VL6180DevDataSet(dev, XTalkCompRate_KCps, XTalkCompRate_KCps);
dmax_status = _DMax_InitData(dev);
if (dmax_status < 0) {
break;
}
/* Read or wait for fresh out of reset */
status = VL6180_RdByte(dev, SYSTEM_FRESH_OUT_OF_RESET, &FreshOutReset);
if (status) {
break;
}
if (FreshOutReset != 1 || dmax_status)
status = CALIBRATION_WARNING;
} while (0);
LOG_FUNCTION_END(status);
return status;
}
int8_t VL6180_GetOffsetCalibrationData(VL6180Dev_t dev)
{
int8_t offset;
LOG_FUNCTION_START("");
offset = VL6180DevDataGet(dev, Part2PartOffsetNVM);
LOG_FUNCTION_END(offset);
return offset;
}
int VL6180_SetOffsetCalibrationData(VL6180Dev_t dev, int8_t offset)
{
int status;
LOG_FUNCTION_START("%d", offset);
VL6180DevDataSet(dev, Part2PartOffsetNVM, offset);
offset /= _GetUpscale(dev);
status = VL6180_WrByte(dev, SYSRANGE_PART_TO_PART_RANGE_OFFSET, offset);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_SetXTalkCompensationRate(VL6180Dev_t dev, FixPoint97_t Rate)
{
int status;
LOG_FUNCTION_START("%d", Rate);
status = VL6180_WrWord(dev, SYSRANGE_CROSSTALK_COMPENSATION_RATE, Rate);
if (status == 0) {
uint32_t XTalkCompRate_KCps;
XTalkCompRate_KCps = Fix7_2_KCPs(Rate);
VL6180DevDataSet(dev, XTalkCompRate_KCps, XTalkCompRate_KCps);
/* update dmax whenever xtalk rate changes */
status = _DMax_InitData(dev);
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_SetI2CAddress(VL6180Dev_t dev, uint8_t NewAddress)
{
int status;
LOG_FUNCTION_START("");
status = VL6180_WrByte(dev, I2C_SLAVE_DEVICE_ADDRESS, NewAddress / 2);
if (status) {
VL6180_ErrLog("new i2c addr Wr fail");
}
LOG_FUNCTION_END(status);
return status;
}
uint16_t VL6180_GetUpperLimit(VL6180Dev_t dev)
{
uint16_t limit;
int scaling;
LOG_FUNCTION_START("");
scaling = _GetUpscale(dev);
/* FIXME we do assume here _GetUpscale is valid if user call us prior to init we may overflow the LUT mem area */
limit = UpperLimitLookUP[scaling - 1];
LOG_FUNCTION_END((int)limit);
return limit;
}
int VL6180_StaticInit(VL6180Dev_t dev)
{
int status = 0, init_status;
LOG_FUNCTION_START("");
/* TODO doc When using configurable scaling but using 1x as start condition
* load tunning upscale or not ??? */
if (_GetUpscale(dev) == 1 && !(VL6180_UPSCALE_SUPPORT < 0))
init_status = VL6180_RangeStaticInit(dev);
else
init_status = VL6180_UpscaleStaticInit(dev);
if (init_status < 0) {
goto error;
} else if (init_status > 0) {
}
if (status < 0) {
VL6180_ErrLog("StaticInit fail");
}
if (!status && init_status) {
status = init_status;
}
error:
LOG_FUNCTION_END(status);
return status;
}
int VL6180_SetGroupParamHold(VL6180Dev_t dev, int Hold)
{
int status;
uint8_t value;
LOG_FUNCTION_START("%d", Hold);
if (Hold)
value = 1;
else
value = 0;
status = VL6180_WrByte(dev, SYSTEM_GROUPED_PARAMETER_HOLD, value);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_Prepare(VL6180Dev_t dev)
{
int status;
LOG_FUNCTION_START("");
do {
status = VL6180_StaticInit(dev);
if (status < 0)
break;
status = VL6180_SetupGPIO1(dev, GPIOx_SELECT_GPIO_INTERRUPT_OUTPUT, INTR_POL_HIGH );
if (status)
break;
/* set range InterruptMode to new sample */
status = VL6180_RangeConfigInterrupt(dev, CONFIG_GPIO_INTERRUPT_NEW_SAMPLE_READY);
if (status)
break;
/* set default threshold */
/* status = VL6180_RangeSetRawThresholds(dev, 10, 200);
if (status) {
break;
}*/
#if VL6180_WRAP_AROUND_FILTER_SUPPORT
_filter_Init(dev);
#endif
/* make sure to reset any left previous condition that can hangs first poll */
status = VL6180_ClearAllInterrupt(dev);
} while (0);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangePollMeasurement(VL6180Dev_t dev, VL6180_RangeData_t *pRangeData)
{
int status;
int ClrStatus;
IntrStatus_t IntStatus;
LOG_FUNCTION_START("");
/* start single range measurement */
#if VL6180_SAFE_POLLING_ENTER
/* if device get stopped with left interrupt uncleared , it is required to clear them now or poll for new condition will never occur*/
status = VL6180_RangeClearInterrupt(dev);
if (status) {
VL6180_ErrLog("VL6180_RangeClearInterrupt fail");
goto done;
}
#endif
/* //![single_shot_snipet] */
status = VL6180_RangeSetSystemMode(dev, MODE_START_STOP | MODE_SINGLESHOT);
if (status) {
goto done;
}
/* poll for new sample ready */
while (1) {
status = VL6180_RangeGetInterruptStatus(dev, &IntStatus.val);
if (status) {
break;
}
if (IntStatus.status.Range == RES_INT_STAT_GPIO_NEW_SAMPLE_READY || IntStatus.status.Error != 0) {
break;
}
//VL6180_PollDelay(dev);
}
/* //![single_shot_snipet] */
if (!status) {
status = VL6180_RangeGetMeasurement(dev, pRangeData);
}
/* clear range interrupt source */
ClrStatus = VL6180_RangeClearInterrupt(dev);
if (ClrStatus) {
/* leave initial status if already in error */
if (!status) {
status = ClrStatus;
}
}
done:
LOG_FUNCTION_END(status);
return status;
}
#if VL6180_CACHED_REG
int VL6180_GetCachedDWord(VL6180Dev_t dev, uint16_t index, uint32_t *pValue)
{
int status;
uint32_t Value;
if (VL6180DevDataGet(dev, CacheFilled) != 0 &&
index >= VL6180_FIRST_CACHED_INDEX &&
index <= (VL6180_LAST_CACHED_INDEX - 3)) {
uint8_t *pBytes = &VL6180DevDataGet(dev, CachedRegs[index - VL6180_FIRST_CACHED_INDEX]);
Value = ((uint32_t)pBytes[0] << 24) |
((uint32_t)pBytes[1] << 16) |
((uint32_t)pBytes[2] << 8) |
(uint32_t)pBytes[3];
*pValue = Value;
status = 0;
} else {
status = VL6180_RdDWord(dev, index, pValue);
}
return status;
}
int VL6180_GetCachedWord(VL6180Dev_t dev, uint16_t index, uint16_t *pValue)
{
int status;
uint32_t Value;
if (VL6180DevDataGet(dev, CacheFilled) != 0 &&
index >= VL6180_FIRST_CACHED_INDEX &&
index <= (VL6180_LAST_CACHED_INDEX - 1)) {
uint8_t *pBytes = &VL6180DevDataGet(dev, CachedRegs[index - VL6180_FIRST_CACHED_INDEX]);
Value = ((uint32_t)pBytes[0] << 8) | (uint32_t)pBytes[1];
*pValue = Value;
status = 0;
} else {
status = VL6180_RdWord(dev, index, pValue);
}
return status;
}
int VL6180_GetCachedByte(VL6180Dev_t dev, uint16_t index, uint8_t *pValue)
{
int status;
uint8_t Value;
if (VL6180DevDataGet(dev, CacheFilled) != 0 &&
index >= VL6180_FIRST_CACHED_INDEX &&
index <= VL6180_LAST_CACHED_INDEX) {
Value = VL6180DevDataGet(dev, CachedRegs[index - VL6180_FIRST_CACHED_INDEX]);
*pValue = Value;
status = 0;
} else {
status = VL6180_RdByte(dev, index, pValue);
}
return status;
}
int _CachedRegs_Fetch(VL6180Dev_t dev)
{
int status;
uint8_t *Buffer;
if (VL6180DevDataGet(dev, CacheFilled) == 0) {
VL6180DevDataSet(dev, CacheFilled, 1);
Buffer = &VL6180DevDataGet(dev, CachedRegs[0]);
status = VL6180_RdMulti(dev, VL6180_FIRST_CACHED_INDEX, Buffer, VL6180_CACHED_REG_CNT);
} else {
status = 0 ;
}
return status;
}
void _CachedRegs_Flush(VL6180Dev_t dev)
{
VL6180DevDataSet(dev, CacheFilled, 0);
}
#else
# define _CachedRegs_Fetch(...) 0
# define _CachedRegs_Flush(...) (void)0
# define _Fetch_CachedRegs(...) 0
# define VL6180_GetCachedByte(dev, index, pValue) VL6180_RdByte(dev, index, pValue)
# define VL6180_GetCachedWord(dev, index, pValue) VL6180_RdWord(dev, index, pValue)
# define VL6180_GetCachedDWord(dev, index, pValue) VL6180_RdDWord(dev, index, pValue)
#endif /* VL6180_CACHED_REG */
int VL6180_RangeGetMeasurement(VL6180Dev_t dev, VL6180_RangeData_t *pRangeData)
{
int status;
uint16_t RawRate;
uint8_t RawStatus;
LOG_FUNCTION_START("");
status = _CachedRegs_Fetch(dev);
if (status) {
VL6180_ErrLog("Cache register read fail");
goto error;
}
status = VL6180_RangeGetResult(dev, &pRangeData->range_mm);
if (!status) {
status = VL6180_GetCachedWord(dev, RESULT_RANGE_SIGNAL_RATE, &RawRate);
if (!status) {
pRangeData->signalRate_mcps = VL6180_9to7Conv(RawRate);
status = VL6180_GetCachedByte(dev, RESULT_RANGE_STATUS, &RawStatus);
if (!status) {
pRangeData->errorStatus = RawStatus >> 4;
} else {
}
#if VL6180_WRAP_AROUND_FILTER_SUPPORT || VL6180_HAVE_DMAX_RANGING
status = _GetRateResult(dev, pRangeData);
if (status)
goto error;
#endif
#if VL6180_WRAP_AROUND_FILTER_SUPPORT
/* if enabled run filter */
if (_IsWrapArroundActive(dev)) {
status = _filter_GetResult(dev, pRangeData);
if (!status) {
/* patch the range status and measure if it is filtered */
if(pRangeData->FilteredData.filterError != NoError) {
pRangeData->errorStatus = pRangeData->FilteredData.filterError;
pRangeData->range_mm = pRangeData->FilteredData.range_mm;
}
}
}
#endif
#if VL6180_HAVE_DMAX_RANGING
if (_IsDMaxActive(dev)) {
_DMax_Compute(dev, pRangeData);
}
#endif
} else {
}
} else {
}
error:
_CachedRegs_Flush(dev);
LOG_FUNCTION_END_FMT(status, "%d %d %d", (int)pRangeData->range_mm, (int)pRangeData->signalRate_mcps, (int)pRangeData->errorStatus) ;
return status;
}
int VL6180_RangeGetMeasurementIfReady(VL6180Dev_t dev, VL6180_RangeData_t *pRangeData)
{
int status;
IntrStatus_t IntStatus;
LOG_FUNCTION_START();
status = VL6180_RangeGetInterruptStatus(dev, &IntStatus.val);
if (status == 0) {
if (IntStatus.status.Range == RES_INT_STAT_GPIO_NEW_SAMPLE_READY ||
IntStatus.status.Error != 0) {
status = VL6180_RangeGetMeasurement(dev, pRangeData);
if (status == 0) {
/* clear range interrupt source */
status = VL6180_RangeClearInterrupt(dev);
if (status) {
VL6180_ErrLog("VL6180_RangeClearInterrupt fail");
}
}
} else {
pRangeData->errorStatus = DataNotReady;
}
} else {
VL6180_ErrLog("fail to get interrupt status");
}
LOG_FUNCTION_END(status) ;
return status;
}
int VL6180_FilterSetState(VL6180Dev_t dev, int state)
{
int status;
LOG_FUNCTION_START("%d", state);
#if VL6180_WRAP_AROUND_FILTER_SUPPORT
VL6180DevDataSet(dev, WrapAroundFilterActive, state);
status = 0;
#else
status = NOT_SUPPORTED;
#endif
LOG_FUNCTION_END(status);
return status;
}
int VL6180_FilterGetState(VL6180Dev_t dev)
{
int status;
LOG_FUNCTION_START("");
#if VL6180_WRAP_AROUND_FILTER_SUPPORT
status = VL6180DevDataGet(dev, WrapAroundFilterActive);
#else
status = 0;
#endif
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeGetResult(VL6180Dev_t dev, int32_t *pRange_mm)
{
int status;
uint8_t RawRange;
int32_t Upscale;
LOG_FUNCTION_START("%p", pRange_mm);
status = VL6180_GetCachedByte(dev, RESULT_RANGE_VAL, &RawRange);
if (!status) {
Upscale = _GetUpscale(dev);
*pRange_mm = Upscale * (int32_t)RawRange;
}
LOG_FUNCTION_END_FMT(status, "%d", (int)*pRange_mm);
return status;
}
int VL6180_RangeSetRawThresholds(VL6180Dev_t dev, uint8_t low, uint8_t high)
{
int status;
LOG_FUNCTION_START("%d %d", (int) low, (int)high);
/* TODO we can optimize here grouping high/low in a word but that's cpu endianness dependent */
status = VL6180_WrByte(dev, SYSRANGE_THRESH_HIGH, high);
if (!status) {
status = VL6180_WrByte(dev, SYSRANGE_THRESH_LOW, low);
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeSetThresholds(VL6180Dev_t dev, uint16_t low, uint16_t high, int UseSafeParamHold)
{
int status;
int scale;
LOG_FUNCTION_START("%d %d", (int) low, (int)high);
scale = _GetUpscale(dev, UpscaleFactor);
if (low > scale * 255 || high > scale * 255) {
status = INVALID_PARAMS;
} else {
do {
if (UseSafeParamHold) {
status = VL6180_SetGroupParamHold(dev, 1);
if (status)
break;
}
status = VL6180_RangeSetRawThresholds(dev, (uint8_t)(low / scale), (uint8_t)(high / scale));
if (UseSafeParamHold) {
int HoldStatus;
/* tryt to unset param hold vene if previous fail */
HoldStatus = VL6180_SetGroupParamHold(dev, 0);
if (!status)
status = HoldStatus;
}
} while (0);
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeGetThresholds(VL6180Dev_t dev, uint16_t *low, uint16_t *high)
{
int status = 0;
uint8_t RawLow, RawHigh;
int scale;
LOG_FUNCTION_START("%p %p", low , high);
scale = _GetUpscale(dev, UpscaleFactor);
do {
if (high != NULL) {
status = VL6180_RdByte(dev, SYSRANGE_THRESH_HIGH, &RawHigh);
if (status) {
VL6180_ErrLog("rd SYSRANGE_THRESH_HIGH fail");
break;
}
*high = (uint16_t)RawHigh * scale;
}
if (low != NULL) {
status = VL6180_RdByte(dev, SYSRANGE_THRESH_LOW, &RawLow);
if (status) {
VL6180_ErrLog("rd SYSRANGE_THRESH_LOW fail");
break;
}
*low = (uint16_t)RawLow * scale;
}
} while (0);
LOG_FUNCTION_END_FMT(status, "%d %d", (int)*low , (int)*high);
return status;
}
int VL6180_RangeGetInterruptStatus(VL6180Dev_t dev, uint8_t *pIntStatus)
{
int status;
uint8_t IntStatus;
LOG_FUNCTION_START("%p", pIntStatus);
/* FIXME we are grouping "error" with over status the user must check implicitly for it
* not just new sample or over status , that will nevr show up in case of error*/
status = VL6180_GetCachedByte(dev, RESULT_INTERRUPT_STATUS_GPIO, &IntStatus);
*pIntStatus = IntStatus & 0xC7;
LOG_FUNCTION_END_FMT(status, "%d", (int)*pIntStatus);
return status;
}
int VL6180_GetInterruptStatus(VL6180Dev_t dev, uint8_t *IntStatus)
{
int status;
LOG_FUNCTION_START("%p" , IntStatus);
status = VL6180_RdByte(dev, RESULT_INTERRUPT_STATUS_GPIO, IntStatus);
LOG_FUNCTION_END_FMT(status, "%d", (int)*IntStatus);
return status;
}
int VL6180_ClearInterrupt(VL6180Dev_t dev, uint8_t IntClear)
{
int status;
LOG_FUNCTION_START("%d", (int)IntClear);
if (IntClear <= 7) {
status = VL6180_WrByte(dev, SYSTEM_INTERRUPT_CLEAR, IntClear);
} else {
status = INVALID_PARAMS;
}
LOG_FUNCTION_END(status);
return status;
}
static int VL6180_RangeStaticInit(VL6180Dev_t dev)
{
int status;
LOG_FUNCTION_START("");
/* REGISTER_TUNING_SR03_270514_CustomerView.txt */
VL6180_WrByte(dev, 0x0207, 0x01);
VL6180_WrByte(dev, 0x0208, 0x01);
VL6180_WrByte(dev, 0x0096, 0x00);
VL6180_WrByte(dev, 0x0097, 0xfd);
VL6180_WrByte(dev, 0x00e3, 0x00);
VL6180_WrByte(dev, 0x00e4, 0x04);
VL6180_WrByte(dev, 0x00e5, 0x02);
VL6180_WrByte(dev, 0x00e6, 0x01);
VL6180_WrByte(dev, 0x00e7, 0x03);
VL6180_WrByte(dev, 0x00f5, 0x02);
VL6180_WrByte(dev, 0x00d9, 0x05);
VL6180_WrByte(dev, 0x00db, 0xce);
VL6180_WrByte(dev, 0x00dc, 0x03);
VL6180_WrByte(dev, 0x00dd, 0xf8);
VL6180_WrByte(dev, 0x009f, 0x00);
VL6180_WrByte(dev, 0x00a3, 0x3c);
VL6180_WrByte(dev, 0x00b7, 0x00);
VL6180_WrByte(dev, 0x00bb, 0x3c);
VL6180_WrByte(dev, 0x00b2, 0x09);
VL6180_WrByte(dev, 0x00ca, 0x09);
VL6180_WrByte(dev, 0x0198, 0x01);
VL6180_WrByte(dev, 0x01b0, 0x17);
VL6180_WrByte(dev, 0x01ad, 0x00);
VL6180_WrByte(dev, 0x00ff, 0x05);
VL6180_WrByte(dev, 0x0100, 0x05);
VL6180_WrByte(dev, 0x0199, 0x05);
VL6180_WrByte(dev, 0x01a6, 0x1b);
VL6180_WrByte(dev, 0x01ac, 0x3e);
VL6180_WrByte(dev, 0x01a7, 0x1f);
VL6180_WrByte(dev, 0x0030, 0x00);
/* Recommended : Public registers - See data sheet for more detail */
VL6180_WrByte(dev, 0x0011, 0x10); /* Enables polling for New Sample ready when measurement completes */
VL6180_WrByte(dev, 0x010a, 0x30); /* Set the averaging sample period (compromise between lower noise and increased execution time) */
VL6180_WrByte(dev, 0x003f, 0x46); /* Sets the light and dark gain (upper nibble). Dark gain should not be changed.*/
VL6180_WrByte(dev, 0x0031, 0xFF); /* sets the # of range measurements after which auto calibration of system is performed */
VL6180_WrByte(dev, 0x002e, 0x01); /* perform a single temperature calibration of the ranging sensor */
/* Optional: Public registers - See data sheet for more detail */
VL6180_WrByte(dev, 0x001b, 0x09); /* Set default ranging inter-measurement period to 100ms */
VL6180_WrByte(dev, 0x0014, 0x24); /* Configures interrupt on New sample ready */
status = VL6180_RangeSetMaxConvergenceTime(dev, 50); /* Calculate ece value on initialization (use max conv) */
LOG_FUNCTION_END(status);
return status;
}
#if VL6180_UPSCALE_SUPPORT != 1
static int _UpscaleInitPatch0(VL6180Dev_t dev)
{
int status;
uint32_t CalValue = 0;
CalValue = VL6180DevDataGet(dev, Part2PartAmbNVM);
status = VL6180_WrDWord(dev, 0xDA, CalValue);
return status;
}
/* only include up-scaling register setting when up-scale support is configured in */
int VL6180_UpscaleRegInit(VL6180Dev_t dev)
{
/* apply REGISTER_TUNING_ER02_100614_CustomerView.txt */
VL6180_WrByte(dev, 0x0207, 0x01);
VL6180_WrByte(dev, 0x0208, 0x01);
VL6180_WrByte(dev, 0x0096, 0x00);
VL6180_WrByte(dev, 0x0097, 0x54);
VL6180_WrByte(dev, 0x00e3, 0x00);
VL6180_WrByte(dev, 0x00e4, 0x04);
VL6180_WrByte(dev, 0x00e5, 0x02);
VL6180_WrByte(dev, 0x00e6, 0x01);
VL6180_WrByte(dev, 0x00e7, 0x03);
VL6180_WrByte(dev, 0x00f5, 0x02);
VL6180_WrByte(dev, 0x00d9, 0x05);
_UpscaleInitPatch0(dev);
VL6180_WrByte(dev, 0x009f, 0x00);
VL6180_WrByte(dev, 0x00a3, 0x28);
VL6180_WrByte(dev, 0x00b7, 0x00);
VL6180_WrByte(dev, 0x00bb, 0x28);
VL6180_WrByte(dev, 0x00b2, 0x09);
VL6180_WrByte(dev, 0x00ca, 0x09);
VL6180_WrByte(dev, 0x0198, 0x01);
VL6180_WrByte(dev, 0x01b0, 0x17);
VL6180_WrByte(dev, 0x01ad, 0x00);
VL6180_WrByte(dev, 0x00ff, 0x05);
VL6180_WrByte(dev, 0x0100, 0x05);
VL6180_WrByte(dev, 0x0199, 0x05);
VL6180_WrByte(dev, 0x01a6, 0x1b);
VL6180_WrByte(dev, 0x01ac, 0x3e);
VL6180_WrByte(dev, 0x01a7, 0x1f);
VL6180_WrByte(dev, 0x0030, 0x00);
VL6180_WrByte(dev, 0x0011, 0x10);
VL6180_WrByte(dev, 0x010a, 0x30);
VL6180_WrByte(dev, 0x003f, 0x46);
VL6180_WrByte(dev, 0x0031, 0xFF);
VL6180_WrByte(dev, 0x0040, 0x63);
VL6180_WrByte(dev, 0x002e, 0x01);
VL6180_WrByte(dev, 0x002c, 0xff);
VL6180_WrByte(dev, 0x001b, 0x09);
VL6180_WrByte(dev, 0x003e, 0x31);
VL6180_WrByte(dev, 0x0014, 0x24);
#if VL6180_EXTENDED_RANGE
VL6180_RangeSetMaxConvergenceTime(dev, 63);
#else
VL6180_RangeSetMaxConvergenceTime(dev, 50);
#endif
return 0;
}
#else
#define VL6180_UpscaleRegInit(...) -1
#endif
int VL6180_UpscaleSetScaling(VL6180Dev_t dev, uint8_t scaling)
{
int status;
uint16_t Scaler;
uint16_t ValidHeight;
int8_t Offset;
#ifdef VL6180_HAVE_UPSCALE_DATA
#define min_scaling 1
#define max_scaling (sizeof(ScalerLookUP) / sizeof(ScalerLookUP[0]))
#else
/* we are in fixed config so only allow configured factor */
#define min_scaling VL6180_UPSCALE_SUPPORT
#define max_scaling VL6180_UPSCALE_SUPPORT
#endif
if (scaling >= min_scaling && scaling <= max_scaling) {
Scaler = ScalerLookUP[scaling - 1];
status = VL6180_WrWord(dev, RANGE_SCALER, Scaler);
_SetUpscale(dev, scaling);
/* Apply scaling on part-2-part offset */
Offset = VL6180DevDataGet(dev, Part2PartOffsetNVM) / scaling;
status = VL6180_WrByte(dev, SYSRANGE_PART_TO_PART_RANGE_OFFSET, Offset);
/* Apply scaling on CrossTalkValidHeight */
if (status == 0) {
status = VL6180_WrByte(dev, SYSRANGE_CROSSTALK_VALID_HEIGHT,
DEF_CROSS_TALK_VALID_HEIGHT_VALUE / scaling);
}
/* Apply scaling on RangeIgnore ValidHeight if enabled */
if ( status == 0) {
if ( VL6180DevDataGet(dev, RangeIgnore.Enabled) !=0 ) {
ValidHeight = VL6180DevDataGet(dev, RangeIgnore.ValidHeight);
ValidHeight /= _GetUpscale(dev);
if( ValidHeight > 255 )
ValidHeight = 255;
status = VL6180_WrByte(dev, SYSRANGE_RANGE_IGNORE_VALID_HEIGHT,
(uint8_t)(ValidHeight & 0xFF) );
}
}
#if !VL6180_EXTENDED_RANGE
if (status == 0) {
status = VL6180_RangeSetEceState(dev, scaling == 1); /* enable ece only at 1x scaling */
}
if (status == 0 && !VL6180_EXTENDED_RANGE && scaling != 1) {
status = NOT_GUARANTEED ;
}
#endif
} else {
status = INVALID_PARAMS;
}
#undef min_scaling
#undef max_scaling
LOG_FUNCTION_END(status);
return status;
}
int VL6180_UpscaleGetScaling(VL6180Dev_t dev)
{
int status;
LOG_FUNCTION_START("");
status = _GetUpscale(dev);
LOG_FUNCTION_END(status);
return status;
}
static int VL6180_UpscaleStaticInit(VL6180Dev_t dev)
{
/* todo make these a fail macro in case only 1x is suppoted */
int status;
LOG_FUNCTION_START("");
do {
status = VL6180_UpscaleRegInit(dev);
if (status) {
break;
}
#if VL6180_EXTENDED_RANGE
status = VL6180_RangeSetEceState(dev, 0);
if (status) {
VL6180_ErrLog("VL6180_RangeSetEceState fail");
break;
}
#endif
} while (0);
if (!status) {
/* must write the scaler at least once to the device to ensure the scaler is in a known state. */
status = VL6180_UpscaleSetScaling(dev, _GetUpscale(dev));
VL6180_WrByte(dev, 0x016, 0x00); /* change fresh out of set status to 0 */
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_SetGPIOxFunctionality(VL6180Dev_t dev, int pin, uint8_t functionality)
{
int status;
LOG_FUNCTION_START("%d %d", (int) pin, (int)functionality);
if (((pin == 0) || (pin == 1)) && IsValidGPIOFunction(functionality)) {
uint16_t RegIndex;
if (pin == 0)
RegIndex = SYSTEM_MODE_GPIO0;
else
RegIndex = SYSTEM_MODE_GPIO1;
status = VL6180_UpdateByte(dev, RegIndex, (uint8_t)~GPIOx_FUNCTIONALITY_SELECT_MASK,
functionality << GPIOx_FUNCTIONALITY_SELECT_SHIFT);
} else {
status = INVALID_PARAMS;
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_SetupGPIOx(VL6180Dev_t dev, int pin, uint8_t IntFunction, int ActiveHigh)
{
int status;
LOG_FUNCTION_START("%d %d", (int) pin, (int)IntFunction);
if (((pin == 0) || (pin == 1)) && IsValidGPIOFunction(IntFunction)) {
uint16_t RegIndex;
uint8_t value = 0;
if (pin == 0)
RegIndex = SYSTEM_MODE_GPIO0;
else
RegIndex = SYSTEM_MODE_GPIO1;
if (ActiveHigh)
value |= GPIOx_POLARITY_SELECT_MASK;
value |= IntFunction << GPIOx_FUNCTIONALITY_SELECT_SHIFT;
status = VL6180_WrByte(dev, RegIndex, value);
if (status) {
}
} else {
status = INVALID_PARAMS;
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_DisableGPIOxOut(VL6180Dev_t dev, int pin)
{
int status;
LOG_FUNCTION_START("%d", (int)pin);
status = VL6180_SetGPIOxFunctionality(dev, pin, GPIOx_SELECT_OFF);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_SetupGPIO1(VL6180Dev_t dev, uint8_t IntFunction, int ActiveHigh)
{
int status;
LOG_FUNCTION_START("%d %d", (int)IntFunction, (int)ActiveHigh);
status = VL6180_SetupGPIOx(dev, 1, IntFunction, ActiveHigh);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeConfigInterrupt(VL6180Dev_t dev, uint8_t ConfigGpioInt)
{
int status;
if (ConfigGpioInt <= CONFIG_GPIO_INTERRUPT_NEW_SAMPLE_READY) {
status = VL6180_UpdateByte(dev, SYSTEM_INTERRUPT_CONFIG_GPIO,
(uint8_t)(~CONFIG_GPIO_RANGE_MASK),
ConfigGpioInt);
} else {
status = INVALID_PARAMS;
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeSetEceFactor(VL6180Dev_t dev, uint16_t FactorM, uint16_t FactorD)
{
int status;
uint8_t u8;
LOG_FUNCTION_START("%d %d", (int)FactorM, (int)FactorD);
do {
/* D cannot be 0 M must be <=D and >= 0 */
if (FactorM <= FactorD && FactorD > 0) {
VL6180DevDataSet(dev, EceFactorM, FactorM);
VL6180DevDataSet(dev, EceFactorD, FactorD);
/* read and re-apply max conv time to get new ece factor set */
status = VL6180_RdByte(dev, SYSRANGE_MAX_CONVERGENCE_TIME, &u8);
if (status) {
VL6180_ErrLog("SYSRANGE_MAX_CONVERGENCE_TIME rd fail ");
break;
}
status = VL6180_RangeSetMaxConvergenceTime(dev, u8);
if (status < 0) {
VL6180_ErrLog("fail to apply time after ece m/d change");
break;
}
} else {
VL6180_ErrLog("invalid factor %d/%d", (int)FactorM, (int)FactorD);
status = INVALID_PARAMS;
}
} while (0);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeSetEceState(VL6180Dev_t dev, int enable)
{
int status;
uint8_t or_mask;
LOG_FUNCTION_START("%d", (int)enable);
if (enable)
or_mask = RANGE_CHECK_ECE_ENABLE_MASK;
else
or_mask = 0;
status = VL6180_UpdateByte(dev, SYSRANGE_RANGE_CHECK_ENABLES, ~RANGE_CHECK_ECE_ENABLE_MASK, or_mask);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeSetMaxConvergenceTime(VL6180Dev_t dev, uint8_t MaxConTime_msec)
{
int status = 0;
LOG_FUNCTION_START("%d", (int)MaxConTime_msec);
do {
status = VL6180_WrByte(dev, SYSRANGE_MAX_CONVERGENCE_TIME, MaxConTime_msec);
if (status) {
break;
}
status = VL6180_RangeSetEarlyConvergenceEestimateThreshold(dev);
if (status) {
break;
}
status = _DMax_InitData(dev);
} while (0);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeSetInterMeasPeriod(VL6180Dev_t dev, uint32_t InterMeasTime_msec)
{
uint8_t SetTime;
int status;
LOG_FUNCTION_START("%d", (int)InterMeasTime_msec);
do {
if (InterMeasTime_msec > 2550) {
status = INVALID_PARAMS;
break;
}
/* doc in not 100% clear and confusing about the limit practically all value are OK but 0
* that can hang device in continuous mode */
if (InterMeasTime_msec < 10) {
InterMeasTime_msec = 10;
}
SetTime = (uint8_t)(InterMeasTime_msec / 10);
status = VL6180_WrByte(dev, SYSRANGE_INTERMEASUREMENT_PERIOD, SetTime);
if (status) {
} else if (SetTime != InterMeasTime_msec / 10) {
status = MIN_CLIPED; /* on success change status to clip if it did */
}
} while (0);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeGetDeviceReady(VL6180Dev_t dev, int *Ready)
{
int status;
uint8_t u8;
LOG_FUNCTION_START("%p", (int)Ready);
status = VL6180_RdByte(dev, RESULT_RANGE_STATUS, &u8);
if (!status)
*Ready = u8&RANGE_DEVICE_READY_MASK;
LOG_FUNCTION_END_FMT(status, "%d", *Ready);
return status;
}
int VL6180_RangeWaitDeviceReady(VL6180Dev_t dev, int MaxLoop)
{
int status = 0; /* if user specify an invalid <=0 loop count we'll return error */
int n;
uint8_t u8;
LOG_FUNCTION_START("%d", (int)MaxLoop);
if (MaxLoop < 1) {
status = INVALID_PARAMS;
} else {
for (n = 0; n < MaxLoop ; n++) {
status = VL6180_RdByte(dev, RESULT_RANGE_STATUS, &u8);
if (status)
break;
u8 = u8 & RANGE_DEVICE_READY_MASK;
if (u8)
break;
}
if (!status && !u8) {
status = TIME_OUT;
}
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeSetSystemMode(VL6180Dev_t dev, uint8_t mode)
{
int status;
LOG_FUNCTION_START("%d", (int)mode);
/* FIXME we are not checking device is ready via @a VL6180_RangeWaitDeviceReady
* so if called back to back real fast we are not checking
* if previous mode "set" got absorbed => bit 0 must be 0 so that it work
*/
if (mode <= 3) {
status = VL6180_WrByte(dev, SYSRANGE_START, mode);
if (status) {
}
} else {
status = INVALID_PARAMS;
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeStartContinuousMode(VL6180Dev_t dev)
{
int status;
LOG_FUNCTION_START("");
status = VL6180_RangeSetSystemMode(dev, MODE_START_STOP | MODE_CONTINUOUS);
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeStartSingleShot(VL6180Dev_t dev)
{
int status;
LOG_FUNCTION_START("");
status = VL6180_RangeSetSystemMode(dev, MODE_START_STOP | MODE_SINGLESHOT);
LOG_FUNCTION_END(status);
return status;
}
static int VL6180_RangeSetEarlyConvergenceEestimateThreshold(VL6180Dev_t dev)
{
int status;
const uint32_t cMicroSecPerMilliSec = 1000;
const uint32_t cEceSampleTime_us = 500;
uint32_t ece_factor_m = VL6180DevDataGet(dev, EceFactorM);
uint32_t ece_factor_d = VL6180DevDataGet(dev, EceFactorD);
uint32_t convergTime_us;
uint32_t fineThresh;
uint32_t eceThresh;
uint8_t u8;
uint32_t maxConv_ms;
int32_t AveTime;
LOG_FUNCTION_START("");
do {
status = VL6180_RdByte(dev, SYSRANGE_MAX_CONVERGENCE_TIME, &u8);
if (status) {
break;
}
maxConv_ms = u8;
AveTime = _GetAveTotalTime(dev);
if (AveTime < 0) {
status = -1;
break;
}
convergTime_us = maxConv_ms * cMicroSecPerMilliSec - AveTime;
status = VL6180_RdDWord(dev, 0xB8, &fineThresh);
if (status) {
break;
}
fineThresh *= 256;
eceThresh = ece_factor_m * cEceSampleTime_us * fineThresh / (convergTime_us * ece_factor_d);
status = VL6180_WrWord(dev, SYSRANGE_EARLY_CONVERGENCE_ESTIMATE, (uint16_t)eceThresh);
} while (0);
LOG_FUNCTION_END(status);
return status;
}
static int _RangeIgnore_UpdateDevice(VL6180Dev_t dev){
int status;
int enable;
int threshold;
int range;
int or_mask;
enable= VL6180DevDataGet(dev, RangeIgnore.Enabled);
if( enable ){
// if to be nabled program first range value and threshold
range = VL6180DevDataGet(dev, RangeIgnore.ValidHeight);
range /= _GetUpscale(dev);
if( range > 255 )
range = 255;
status = VL6180_WrByte(dev, SYSRANGE_RANGE_IGNORE_VALID_HEIGHT, range);
if( status ){
goto done;
}
threshold = VL6180DevDataGet(dev, RangeIgnore.IgnoreThreshold);
status = VL6180_WrWord(dev, SYSRANGE_RANGE_IGNORE_THRESHOLD, threshold);
if( status ){
goto done;
}
or_mask = RANGE_CHECK_RANGE_ENABLE_MASK;
}
else{
or_mask = 0;
}
status = VL6180_UpdateByte(dev, SYSRANGE_RANGE_CHECK_ENABLES, ~RANGE_CHECK_RANGE_ENABLE_MASK, or_mask);
_DMax_InitData(dev);
done:
return status;
}
int VL6180_RangeIgnoreSetEnable(VL6180Dev_t dev, int EnableState){
int CurEnable;
int status=0;
LOG_FUNCTION_START("enable %d", EnableState);
if( EnableState )
EnableState = 1;
CurEnable = VL6180DevDataGet(dev, RangeIgnore.Enabled);
if( EnableState != CurEnable ){
VL6180DevDataSet(dev, RangeIgnore.Enabled, EnableState);
status = _RangeIgnore_UpdateDevice(dev);
}
LOG_FUNCTION_END(status);
return status;
}
int VL6180_RangeIgnoreConfigure(VL6180Dev_t dev, uint16_t ValidHeight_mm, uint16_t IgnoreThreshold){
int status;
int enabled;
LOG_FUNCTION_START("height= %d Threshold=%d", (int)ValidHeight_mm, (int)Threshold);
enabled = VL6180DevDataGet(dev, RangeIgnore.Enabled);
VL6180DevDataSet(dev, RangeIgnore.ValidHeight, ValidHeight_mm);
VL6180DevDataSet(dev, RangeIgnore.IgnoreThreshold, IgnoreThreshold);
if( enabled ){
status = _RangeIgnore_UpdateDevice(dev);
}
else{
status = 0;
}
LOG_FUNCTION_END(status);
return status;
}
/*
* Return >0 = time
* <0 1 if fail to get read data from device to compute time
*/
static int32_t _GetAveTotalTime(VL6180Dev_t dev)
{
uint32_t cFwOverhead_us = 24;
uint32_t cVcpSetupTime_us = 70;
uint32_t cPLL2_StartupDelay_us = 200;
uint8_t cMeasMask = 0x07;
uint32_t Samples;
uint32_t SamplePeriod;
uint32_t SingleTime_us;
int32_t TotalAveTime_us;
uint8_t u8;
int status;
LOG_FUNCTION_START("");
status = VL6180_RdByte(dev, 0x109, &u8);
if (status) {
return -1;
}
Samples = u8 & cMeasMask;
status = VL6180_RdByte(dev, READOUT_AVERAGING_SAMPLE_PERIOD, &u8);
if (status) {
return -1;
}
SamplePeriod = u8;
SingleTime_us = cFwOverhead_us + cVcpSetupTime_us + (SamplePeriod * 10);
TotalAveTime_us = (Samples + 1) * SingleTime_us + cPLL2_StartupDelay_us;
LOG_FUNCTION_END(TotalAveTime_us);
return TotalAveTime_us;
}
#if VL6180_HAVE_DMAX_RANGING
#define _GetDMaxDataRetSignalAt400mm(dev) VL6180DevDataGet(dev, DMaxData.retSignalAt400mm)
#else
#define _GetDMaxDataRetSignalAt400mm(dev) 375 /* Use a default high value */
#endif
#if VL6180_WRAP_AROUND_FILTER_SUPPORT
#define PRESERVE_DEVICE_ERROR_CODE /* If uncommented, device error code will be preserved on top of wraparound error code, but this may lead to some error code instability like overflow error <==> RangingFilteringOnGoing error oscillations */
#define SENSITIVE_FILTERING_ON_GOING /* If uncommented, filter will go back to RangingFilteringOnGoing if it must go through the std dev testing */
#define FILTER_STDDEV_SAMPLES 6
#define MIN_FILTER_STDDEV_SAMPLES 3
#define MIN_FILTER_STDDEV_SAMPLES_AFTER_FLUSH_OR_BYPASS 5
#define STDDEV_BASE_VALUE 150
#define FILTER_INVALID_DISTANCE 65535
#define _FilterData(field) VL6180DevDataGet(dev, FilterData.field)
/*
* One time init
*/
int _filter_Init(VL6180Dev_t dev)
{
int i;
_FilterData(MeasurementIndex) = 0;
_FilterData(Default_ZeroVal) = 0;
_FilterData(Default_VAVGVal) = 0;
_FilterData(NoDelay_ZeroVal) = 0;
_FilterData(NoDelay_VAVGVal) = 0;
_FilterData(Previous_VAVGDiff) = 0;
_FilterData(StdFilteredReads) = 0;
_FilterData(FilteringOnGoingConsecutiveStates) = 0;
for (i = 0; i < FILTER_NBOF_SAMPLES; i++) {
_FilterData(LastTrueRange)[i] = FILTER_INVALID_DISTANCE;
_FilterData(LastReturnRates)[i] = 0;
}
_FilterData(MeasurementsSinceLastFlush)=0;
return 0;
}
static uint32_t _filter_StdDevDamper(uint32_t AmbientRate,
uint32_t SignalRate,
const uint32_t StdDevLimitLowLight,
const uint32_t StdDevLimitLowLightSNR,
const uint32_t StdDevLimitHighLight,
const uint32_t StdDevLimitHighLightSNR)
{
uint32_t newStdDev;
uint16_t SNR;
if (AmbientRate > 0)
SNR = (uint16_t) ((100 * SignalRate) / AmbientRate);
else
SNR = 9999;
if (SNR >= StdDevLimitLowLightSNR) {
newStdDev = StdDevLimitLowLight;
} else {
if (SNR <= StdDevLimitHighLightSNR)
newStdDev = StdDevLimitHighLight;
else {
newStdDev = (uint32_t)(StdDevLimitHighLight -
(SNR - StdDevLimitHighLightSNR) *
(StdDevLimitHighLight - StdDevLimitLowLight) /
(StdDevLimitLowLightSNR - StdDevLimitHighLightSNR));
}
}
return newStdDev;
}
/*
* Return <0 on error
*/
static int32_t _filter_Start(VL6180Dev_t dev,
uint16_t m_trueRange_mm,
uint16_t m_rawRange_mm,
uint32_t m_rtnSignalRate,
uint32_t m_rtnAmbientRate,
uint16_t errorCode)
{
int status;
uint16_t m_newTrueRange_mm = 0;
#if VL6180_HAVE_MULTI_READ
uint8_t MultiReadBuf[8];
#endif
uint16_t i;
uint16_t bypassFilter = 0;
uint16_t resetVAVGData = 1;
uint16_t filterErrorCode = NoError;
uint16_t filterErrorCodeOnRangingErrorCode = NoError;
uint16_t registerValue;
uint32_t register32BitsValue1;
uint32_t register32BitsValue2;
uint16_t ValidDistance = 0;
uint16_t SuspicuousRangingZone = 0;
uint16_t WrapAroundFlag = 0;
uint16_t NoWrapAroundFlag = 0;
uint16_t NoWrapAroundHighConfidenceFlag = 0;
uint16_t FlushFilter = 0;
uint32_t RateChange = 0;
uint16_t StdDevSamplesMinNeeded = 0;
uint16_t StdDevSamples = 0;
uint32_t StdDevDistanceSum = 0;
uint32_t StdDevDistanceMean = 0;
uint32_t StdDevDistance = 0;
uint32_t StdDevRateSum = 0;
uint32_t StdDevRateMean = 0;
uint32_t StdDevRate = 0;
uint32_t StdDevLimitWithTargetMove = 0;
uint32_t VAVGDiff;
uint32_t IdealVAVGDiff;
uint32_t MinVAVGDiff;
uint32_t MaxVAVGDiff;
/* Filter Parameters */
static const uint16_t ROMABLE_DATA WrapAroundLowRawRangeLimit = 60;
static const uint32_t ROMABLE_DATA WrapAroundLowReturnRateLimit_ROM = 800;
/* Shall be adapted depending on crossTalk */
static const uint16_t ROMABLE_DATA WrapAroundLowRawRangeLimit2 = 165;
static const uint32_t ROMABLE_DATA WrapAroundLowReturnRateLimit2_ROM = 180;
/* Shall be adapted depending on crossTalk and device sensitivity*/
static const uint32_t ROMABLE_DATA WrapAroundLowRawRangeLimit2SuspicuousAddedSignalRate = 150;
static const uint32_t ROMABLE_DATA WrapAroundLowReturnRateFilterLimit_ROM = 850;
/* Shall be adapted depending on crossTalk and device sensitivity*/
static const uint16_t ROMABLE_DATA WrapAroundHighRawRangeFilterLimit = 350;
static const uint32_t ROMABLE_DATA WrapAroundHighReturnRateFilterLimit_ROM = 1400;
/* Shall be adapted depending on crossTalk and device sensitivity*/
static const uint32_t ROMABLE_DATA WrapAroundMaximumAmbientRateFilterLimit = 15000;
/* Temporal filter data and flush values */
static const uint32_t ROMABLE_DATA MinReturnRateFilterFlush = 75;
static const uint32_t ROMABLE_DATA MaxReturnRateChangeFilterFlush = 50;
/* STDDEV values and damper values */
static const uint32_t ROMABLE_DATA StdDevLimitLowLight = STDDEV_BASE_VALUE;
static const uint32_t ROMABLE_DATA StdDevLimitLowLightSNR = 30; /* 0.3 */
static const uint32_t ROMABLE_DATA StdDevLimitHighLight = STDDEV_BASE_VALUE*6;
static const uint32_t ROMABLE_DATA StdDevLimitHighLightSNR = 5; /* 0.05 */
static const uint32_t ROMABLE_DATA StdDevHighConfidenceSNRLimit = 8;
static const uint32_t ROMABLE_DATA StdDevNoWrapDetectedMultiplier = 4;
static const uint32_t ROMABLE_DATA StdDevMovingTargetStdDevLimit = 90000;
static const uint32_t ROMABLE_DATA StdDevMovingTargetReturnRateLimit = 3500;
static const uint32_t ROMABLE_DATA StdDevMovingTargetStdDevForReturnRateLimit = STDDEV_BASE_VALUE*25;
static const uint32_t ROMABLE_DATA MAX_VAVGDiff_ROM = 1800;
static const uint32_t ROMABLE_DATA SuspicuousMAX_VAVGDiffRatio = 2;
/* WrapAroundDetection variables */
static const uint16_t ROMABLE_DATA WrapAroundNoDelayCheckPeriod = 2;
static const uint16_t ROMABLE_DATA StdFilteredReadsIncrement = 2;
static const uint16_t ROMABLE_DATA StdFilteredReadsDecrement = 1;
static const uint16_t ROMABLE_DATA StdMaxFilteredReads = 4;
uint32_t SignalRateDMax;
uint32_t WrapAroundLowReturnRateLimit;
uint32_t WrapAroundLowReturnRateLimit2;
uint32_t WrapAroundLowReturnRateFilterLimit;
uint32_t WrapAroundHighReturnRateFilterLimit;
uint32_t MAX_VAVGDiff = 1800;
uint8_t u8;//, u8_2;
uint32_t XTalkCompRate_KCps;
uint32_t StdDevLimit = 300;
uint32_t MaxOrInvalidDistance = 255*_GetUpscale(dev);
/* #define MaxOrInvalidDistance (uint16_t) (255 * 3) */
/* Check if distance is Valid or not */
switch (errorCode) {
case Raw_Ranging_Algo_Underflow:
case Ranging_Algo_Underflow:
filterErrorCodeOnRangingErrorCode = RangingFiltered; /* If we have to go through filter, mean we have here a wraparound case */
ValidDistance = 0;
break;
case Raw_Ranging_Algo_Overflow:
case Ranging_Algo_Overflow:
filterErrorCodeOnRangingErrorCode = RangingFiltered; /* If we have to go through filter, mean we have here a wraparound case */
//m_trueRange_mm = MaxOrInvalidDistance;
m_trueRange_mm = 200*_GetUpscale(dev);
ValidDistance = 1;
break;
default:
if (m_rawRange_mm >= MaxOrInvalidDistance) {
ValidDistance = 0;
bypassFilter = 1; /* Bypass the filter in this case as produced distance is not usable (and also the VAVGVal and ZeroVal values) */
} else {
ValidDistance = 1;
}
break;
}
m_newTrueRange_mm = m_trueRange_mm;
XTalkCompRate_KCps = VL6180DevDataGet(dev, XTalkCompRate_KCps);
/* Update signal rate limits depending on crosstalk */
SignalRateDMax = (uint32_t)_GetDMaxDataRetSignalAt400mm(dev) ;
WrapAroundLowReturnRateLimit = WrapAroundLowReturnRateLimit_ROM + XTalkCompRate_KCps;
WrapAroundLowReturnRateLimit2 = ((WrapAroundLowReturnRateLimit2_ROM *
SignalRateDMax) / 312) +
XTalkCompRate_KCps;
WrapAroundLowReturnRateFilterLimit = ((WrapAroundLowReturnRateFilterLimit_ROM *
SignalRateDMax) / 312) + XTalkCompRate_KCps;
WrapAroundHighReturnRateFilterLimit = ((WrapAroundHighReturnRateFilterLimit_ROM *
SignalRateDMax) / 312) + XTalkCompRate_KCps;
/* Checks on low range data */
if ((m_rawRange_mm < WrapAroundLowRawRangeLimit) && (m_rtnSignalRate < WrapAroundLowReturnRateLimit)) {
filterErrorCode = RangingFiltered; /* On this condition, wraparound case is ensured */
bypassFilter = 1;
}
if ((m_rawRange_mm < WrapAroundLowRawRangeLimit2) && (m_rtnSignalRate < WrapAroundLowReturnRateLimit2)) {
filterErrorCode = RangingFiltered; /* On this condition, wraparound case is ensured */
bypassFilter = 1;
}
if ((m_rawRange_mm < WrapAroundLowRawRangeLimit2) && (m_rtnSignalRate < (WrapAroundLowReturnRateLimit2 + WrapAroundLowRawRangeLimit2SuspicuousAddedSignalRate))) {
SuspicuousRangingZone = 1; /* On this area, we are in an highly suspicuous wraparound ares, filter parameter will be stengthen */
}
/* Checks on Ambient rate level */
if (m_rtnAmbientRate > WrapAroundMaximumAmbientRateFilterLimit) {
/* Too high ambient rate */
FlushFilter = 1;
bypassFilter = 1;
}
/* Checks on Filter flush */
if (m_rtnSignalRate < MinReturnRateFilterFlush) {
/* Completely lost target, so flush the filter */
FlushFilter = 1;
bypassFilter = 1;
}
if (_FilterData(LastReturnRates)[0] != 0) {
if (m_rtnSignalRate > _FilterData(LastReturnRates)[0])
RateChange = (100 *
(m_rtnSignalRate - _FilterData(LastReturnRates)[0])) /
_FilterData(LastReturnRates)[0];
else
RateChange = (100 *
(_FilterData(LastReturnRates)[0] - m_rtnSignalRate)) /
_FilterData(LastReturnRates)[0];
} else
RateChange = 0;
if (RateChange > MaxReturnRateChangeFilterFlush) {
FlushFilter = 1;
}
/* TODO optimize filter using circular buffer */
if (FlushFilter == 1) {
_FilterData(MeasurementIndex) = 0;
for (i = 0; i < FILTER_NBOF_SAMPLES; i++) {
_FilterData(LastTrueRange)[i] = FILTER_INVALID_DISTANCE;
_FilterData(LastReturnRates)[i] = 0;
}
_FilterData(MeasurementsSinceLastFlush)=0;
} else {
for (i = (uint16_t) (FILTER_NBOF_SAMPLES - 1); i > 0; i--) {
_FilterData(LastTrueRange)[i] = _FilterData(LastTrueRange)[i - 1];
_FilterData(LastReturnRates)[i] = _FilterData(LastReturnRates)[i - 1];
}
}
if (ValidDistance == 1)
_FilterData(LastTrueRange)[0] = m_trueRange_mm;
else
_FilterData(LastTrueRange)[0] = FILTER_INVALID_DISTANCE;
_FilterData(LastReturnRates)[0] = m_rtnSignalRate;
_FilterData(MeasurementsSinceLastFlush)++;
/* Check if we need to go through the filter or not */
if (!(((m_rawRange_mm < WrapAroundHighRawRangeFilterLimit) &&
(m_rtnSignalRate < WrapAroundLowReturnRateFilterLimit)) ||
((m_rawRange_mm >= WrapAroundHighRawRangeFilterLimit) &&
(m_rtnSignalRate < WrapAroundHighReturnRateFilterLimit))))
bypassFilter = 1;
else {
/* if some wraparound filtering due to some ranging error code has been detected, update the filter status and bypass the filter */
if(filterErrorCodeOnRangingErrorCode!=NoError){
#ifndef PRESERVE_DEVICE_ERROR_CODE
filterErrorCode = filterErrorCodeOnRangingErrorCode;
#else
if((errorCode==Raw_Ranging_Algo_Underflow) || (errorCode==Ranging_Algo_Underflow)) {
/* Preserves the error codes except for Raw_Ranging_Algo_Underflow and Ranging_Algo_Underflow */
filterErrorCode = filterErrorCodeOnRangingErrorCode;
}
#endif
bypassFilter = 1;
resetVAVGData = 0;
}
}
/* Check which kind of measurement has been made */
status = VL6180_RdByte(dev, 0x01AC, &u8);
if (status) {
goto done_err;
}
registerValue = u8;
/* Read data for filtering */
#if VL6180_HAVE_MULTI_READ
status = VL6180_RdMulti(dev, 0x10C, MultiReadBuf, 8); /* read only 8 lsb bits */
if (status) {
VL6180_ErrLog("0x10C multi rd fail");
goto done_err;
}
register32BitsValue1 = ((uint32_t) MultiReadBuf[0] << 24)
+ ((uint32_t) MultiReadBuf[1] << 16)
+ ((uint32_t) MultiReadBuf[2] << 8)
+ ((uint32_t) MultiReadBuf[3] << 0);
register32BitsValue2 = ((uint32_t) MultiReadBuf[4] << 24)
+ ((uint32_t) MultiReadBuf[5] << 16)
+ ((uint32_t) MultiReadBuf[6] << 8)
+ ((uint32_t) MultiReadBuf[7] << 0);
#else
status = VL6180_RdDWord(dev, 0x10C, &register32BitsValue1); /* read 32 bits, lower 17 bits are the one useful */
if (status) {
goto done_err;
}
status = VL6180_RdDWord(dev, 0x0110, & register32BitsValue2); /* read 32 bits, lower 17 bits are the one useful */
if (status) {
goto done_err;
}
#endif
if ((FlushFilter == 1) || ((bypassFilter == 1) && (resetVAVGData == 1))) {
if (registerValue != 0x3E) {
status = VL6180_WrByte(dev, 0x1AC, 0x3E);
if (status) {
goto done_err;
}
//status = VL6180_WrByte(dev, 0x0F2, 0x01);
//if (status) {
// VL6180_ErrLog("0x0F2 bypass wr fail");
// goto done_err;
//}
}
/* Set both Default and NoDelay To same value */
_FilterData(Default_ZeroVal) = register32BitsValue1;
_FilterData(Default_VAVGVal) = register32BitsValue2;
_FilterData(NoDelay_ZeroVal) = register32BitsValue1;
_FilterData(NoDelay_VAVGVal) = register32BitsValue2;
_FilterData(MeasurementIndex) = 0;
} else {
if (registerValue == 0x3E) {
_FilterData(Default_ZeroVal) = register32BitsValue1;
_FilterData(Default_VAVGVal) = register32BitsValue2;
} else {
_FilterData(NoDelay_ZeroVal) = register32BitsValue1;
_FilterData(NoDelay_VAVGVal) = register32BitsValue2;
}
if (_FilterData(MeasurementIndex) % WrapAroundNoDelayCheckPeriod == 0) {
u8 = 0x3C;
//u8_2 = 0x05;
} else {
u8 = 0x3E;
//u8_2 = 0x01;
}
status = VL6180_WrByte(dev, 0x01AC, u8);
if (status) {
goto done_err;
}
//status = VL6180_WrByte(dev, 0x0F2, u8_2);
//if (status) {
// VL6180_ErrLog("0x0F2 wr fail");
// goto done_err;
//}
_FilterData(MeasurementIndex)++;
}
if (bypassFilter == 1) {
/* Do not go through the filter */
/* Update filter error code */
_FilterData(filterError) = filterErrorCode;
/* Update reported range */
if(filterErrorCode==RangingFiltered)
m_newTrueRange_mm = MaxOrInvalidDistance; /* Set to invalid distance */
return m_newTrueRange_mm;
}
/* Computes current VAVGDiff */
if (_FilterData(Default_VAVGVal) > _FilterData(NoDelay_VAVGVal))
VAVGDiff = _FilterData(Default_VAVGVal) - _FilterData(NoDelay_VAVGVal);
else
VAVGDiff = 0;
_FilterData(Previous_VAVGDiff) = VAVGDiff;
if(SuspicuousRangingZone==0)
MAX_VAVGDiff = MAX_VAVGDiff_ROM;
else
/* In suspicuous area, strengthen the filter */
MAX_VAVGDiff = MAX_VAVGDiff_ROM / SuspicuousMAX_VAVGDiffRatio;
/* Check the VAVGDiff */
if (_FilterData(Default_ZeroVal) > _FilterData(NoDelay_ZeroVal))
IdealVAVGDiff = _FilterData(Default_ZeroVal) - _FilterData(NoDelay_ZeroVal);
else
IdealVAVGDiff = _FilterData(NoDelay_ZeroVal) - _FilterData(Default_ZeroVal);
if (IdealVAVGDiff > MAX_VAVGDiff)
MinVAVGDiff = IdealVAVGDiff - MAX_VAVGDiff;
else
MinVAVGDiff = 0;
MaxVAVGDiff = IdealVAVGDiff + MAX_VAVGDiff;
if (VAVGDiff < MinVAVGDiff || VAVGDiff > MaxVAVGDiff) {
WrapAroundFlag = 1;
filterErrorCode = RangingFiltered;
} else {
/* Go through filtering check */
if(_FilterData(MeasurementIndex)<=1)
/* On measurement after a bypass, uses an increase number of samples */
StdDevSamplesMinNeeded = MIN_FILTER_STDDEV_SAMPLES_AFTER_FLUSH_OR_BYPASS;
else
StdDevSamplesMinNeeded = MIN_FILTER_STDDEV_SAMPLES;
/* StdDevLimit Damper on SNR */
StdDevLimit = _filter_StdDevDamper(m_rtnAmbientRate, m_rtnSignalRate, StdDevLimitLowLight, StdDevLimitLowLightSNR, StdDevLimitHighLight, StdDevLimitHighLightSNR);
/* Standard deviations computations */
StdDevSamples = 0;
StdDevDistanceSum = 0;
StdDevDistanceMean = 0;
StdDevDistance = 0;
StdDevRateSum = 0;
StdDevRateMean = 0;
StdDevRate = 0;
for (i = 0; (i < FILTER_NBOF_SAMPLES) && (StdDevSamples < FILTER_STDDEV_SAMPLES); i++) {
if (_FilterData(LastTrueRange)[i] != FILTER_INVALID_DISTANCE) {
StdDevSamples = (uint16_t) (StdDevSamples + 1);
StdDevDistanceSum = (uint32_t) (StdDevDistanceSum + _FilterData(LastTrueRange)[i]);
StdDevRateSum = (uint32_t) (StdDevRateSum + _FilterData(LastReturnRates)[i]);
}
}
if (StdDevSamples > 0) {
StdDevDistanceMean = (uint32_t) (StdDevDistanceSum / StdDevSamples);
StdDevRateMean = (uint32_t) (StdDevRateSum / StdDevSamples);
}
/* TODO optimize shorten Std dev in aisngle loop computation using sum of x2 - (sum of x)2 */
StdDevSamples = 0;
StdDevDistanceSum = 0;
StdDevRateSum = 0;
for (i = 0; (i < FILTER_NBOF_SAMPLES) && (StdDevSamples < FILTER_STDDEV_SAMPLES); i++) {
if (_FilterData(LastTrueRange)[i] != FILTER_INVALID_DISTANCE) {
StdDevSamples = (uint16_t) (StdDevSamples + 1);
StdDevDistanceSum = (uint32_t) (StdDevDistanceSum +
(int)(_FilterData(LastTrueRange)[i] -
StdDevDistanceMean) *
(int) (_FilterData(LastTrueRange)[i] -
StdDevDistanceMean));
StdDevRateSum = (uint32_t) (StdDevRateSum +
(int) (_FilterData(LastReturnRates)[i] -
StdDevRateMean) *
(int) (_FilterData(LastReturnRates)[i] -
StdDevRateMean));
}
}
if (StdDevSamples >= StdDevSamplesMinNeeded) {
StdDevDistance = (uint16_t) (StdDevDistanceSum / StdDevSamples);
StdDevRate = (uint16_t) (StdDevRateSum / StdDevSamples);
} else {
StdDevDistance = 0;
StdDevRate = 0;
}
/* Check Return rate standard deviation */
if (StdDevRate < StdDevMovingTargetStdDevLimit) {
if (StdDevSamples < StdDevSamplesMinNeeded) {
//m_newTrueRange_mm = MaxOrInvalidDistance;
filterErrorCode = RangingFiltered;
} else {
/* Check distance standard deviation */
if (StdDevRate < StdDevMovingTargetReturnRateLimit)
StdDevLimitWithTargetMove = StdDevLimit +
(((StdDevMovingTargetStdDevForReturnRateLimit -
StdDevLimit) * StdDevRate) /
StdDevMovingTargetReturnRateLimit);
else
StdDevLimitWithTargetMove = StdDevMovingTargetStdDevForReturnRateLimit;
if(_FilterData(filterError)==NoError){
/* No wrapAround detected yet, so relax constraints on the std dev */
StdDevLimitWithTargetMove = StdDevLimitWithTargetMove * StdDevNoWrapDetectedMultiplier;
}
if (((StdDevDistance * StdDevHighConfidenceSNRLimit) < StdDevLimit) && (StdDevSamples>=FILTER_STDDEV_SAMPLES)) {
NoWrapAroundHighConfidenceFlag = 1;
} else {
if (StdDevDistance < StdDevLimitWithTargetMove) {
NoWrapAroundFlag = 1;
} else {
WrapAroundFlag = 1;
filterErrorCode = RangingFiltered;
}
}
}
} else {
/* Target moving too fast */
WrapAroundFlag = 1;
filterErrorCode = RangingFiltered;
}
}
if (ValidDistance == 0) {
/* In case of invalid distance */
if (_FilterData(StdFilteredReads) > 0)
_FilterData(StdFilteredReads) = (uint16_t) (_FilterData(StdFilteredReads) - 1);
} else {
if (WrapAroundFlag == 1) {
_FilterData(StdFilteredReads) = (uint16_t) (_FilterData(StdFilteredReads) +
StdFilteredReadsIncrement);
if (_FilterData(StdFilteredReads) > StdMaxFilteredReads)
_FilterData(StdFilteredReads) = StdMaxFilteredReads;
} else {
if (NoWrapAroundFlag == 1) {
if (_FilterData(StdFilteredReads) > 0) {
filterErrorCode = RangingFiltered;
if (_FilterData(StdFilteredReads) > StdFilteredReadsDecrement)
_FilterData(StdFilteredReads) = (uint16_t) (_FilterData(StdFilteredReads) -
StdFilteredReadsDecrement);
else
_FilterData(StdFilteredReads) = 0;
}
} else {
if (NoWrapAroundHighConfidenceFlag == 1) {
_FilterData(StdFilteredReads) = 0;
}
}
}
}
/* If we detect a change from no Error to RangingFilteringOnGoing, then it means that
* the filter detected a change in te scene, so discard all previous measurements.
*/
if((_FilterData(filterError) == NoError) && (filterErrorCode!=NoError)) {
for (i = 1; i < FILTER_NBOF_SAMPLES; i++) {
_FilterData(LastTrueRange)[i] = FILTER_INVALID_DISTANCE;
_FilterData(LastReturnRates)[i] = 0;
}
}
/* Update filter error code */
_FilterData(filterError) = filterErrorCode;
/* Update reported range */
if(filterErrorCode==RangingFiltered)
m_newTrueRange_mm = MaxOrInvalidDistance; /* Set to invalid distance */
return m_newTrueRange_mm;
done_err:
return -1;
#undef MaxOrInvalidDistance
}
static int _filter_GetResult(VL6180Dev_t dev, VL6180_RangeData_t *pRangeData)
{
uint32_t m_rawRange_mm = 0;
int32_t FilteredRange;
const uint8_t scaler = _GetUpscale(dev);
uint8_t u8;
int status;
do {
status = VL6180_GetCachedByte(dev, RESULT_RANGE_RAW, &u8);
if (status) {
break;
}
m_rawRange_mm = u8;
FilteredRange = _filter_Start(dev, pRangeData->range_mm, (m_rawRange_mm * scaler), pRangeData->rtnRate, pRangeData->rtnAmbRate, pRangeData->errorStatus);
if (FilteredRange < 0) {
status = -1;
break;
}
pRangeData->FilteredData.range_mm = FilteredRange;
pRangeData->FilteredData.rawRange_mm = m_rawRange_mm * scaler;
pRangeData->FilteredData.filterError= _FilterData(filterError);
} while (0);
return status;
}
#undef _FilterData
#ifdef PRESERVE_DEVICE_ERROR_CODE
#undef PRESERVE_DEVICE_ERROR_CODE
#endif
#ifdef SENSITIVE_FILTERING_ON_GOING
#undef SENSITIVE_FILTERING_ON_GOING
#endif
#undef FILTER_STDDEV_SAMPLES
#undef MIN_FILTER_STDDEV_SAMPLES
#undef MIN_FILTER_STDDEV_SAMPLES_AFTER_FLUSH_OR_BYPASS
#undef STDDEV_BASE_VALUE
#undef FILTER_INVALID_DISTANCE
#endif /* VL6180_WRAP_AROUND_FILTER_SUPPORT */
#ifdef VL6180_HAVE_RATE_DATA
static int _GetRateResult(VL6180Dev_t dev, VL6180_RangeData_t *pRangeData)
{
uint32_t m_rtnConvTime = 0;
uint32_t m_rtnSignalRate = 0;
uint32_t m_rtnAmbientRate = 0;
uint32_t m_rtnSignalCount = 0;
uint32_t m_rtnAmbientCount = 0;
uint32_t m_refConvTime = 0;
uint32_t cRtnSignalCountMax = 0x7FFFFFFF;
uint32_t cDllPeriods = 6;
uint32_t calcConvTime = 0;
int status;
do {
status = VL6180_GetCachedDWord(dev, RESULT_RANGE_RETURN_SIGNAL_COUNT, &m_rtnSignalCount);
if (status) {
break;
}
if (m_rtnSignalCount > cRtnSignalCountMax) {
m_rtnSignalCount = 0;
}
status = VL6180_GetCachedDWord(dev, RESULT_RANGE_RETURN_AMB_COUNT, &m_rtnAmbientCount);
if (status) {
break;
}
status = VL6180_GetCachedDWord(dev, RESULT_RANGE_RETURN_CONV_TIME, &m_rtnConvTime);
if (status) {
break;
}
status = VL6180_GetCachedDWord(dev, RESULT_RANGE_REFERENCE_CONV_TIME, &m_refConvTime);
if (status) {
break;
}
pRangeData->rtnConvTime = m_rtnConvTime;
pRangeData->refConvTime = m_refConvTime;
calcConvTime = m_refConvTime;
if (m_rtnConvTime > m_refConvTime) {
calcConvTime = m_rtnConvTime;
}
if (calcConvTime == 0)
calcConvTime = 63000;
m_rtnSignalRate = (m_rtnSignalCount * 1000) / calcConvTime;
m_rtnAmbientRate = (m_rtnAmbientCount * cDllPeriods * 1000) / calcConvTime;
pRangeData->rtnRate = m_rtnSignalRate;
pRangeData->rtnAmbRate = m_rtnAmbientRate;
} while (0);
return status;
}
#endif /* VL6180_HAVE_RATE_DATA */
int VL6180_DMaxSetState(VL6180Dev_t dev, int state)
{
int status;
LOG_FUNCTION_START("%d", state);
#if VL6180_HAVE_DMAX_RANGING
VL6180DevDataSet(dev, DMaxEnable, state);
if (state) {
status = _DMax_InitData(dev);
} else {
status = 0;
}
#else
status = NOT_SUPPORTED;
#endif
LOG_FUNCTION_END(status);
return status;
}
int VL6180_DMaxGetState(VL6180Dev_t dev)
{
int status;
LOG_FUNCTION_START("");
#if VL6180_HAVE_DMAX_RANGING
status = VL6180DevDataGet(dev, DMaxEnable);
#else
status = 0;
#endif
LOG_FUNCTION_END(status);
return status;
}
#if VL6180_HAVE_DMAX_RANGING
#define _DMaxData(field) VL6180DevDataGet(dev, DMaxData.field)
/*
* Convert fix point x.7 to KCpount per sec
*/
#ifndef VL6180_PLATFORM_PROVIDE_SQRT
/*
* 32 bit integer square root with not so bad precision (integer result) and is quite fast
* see http://en.wikipedia.org/wiki/Methods_of_computing_square_roots
*/
uint32_t VL6180_SqrtUint32(uint32_t num)
{
uint32_t res = 0;
uint32_t bit = 1 << 30; /* The second-to-top bit is set: 1 << 30 for 32 bits */
/* "bit" starts at the highest power of four <= the argument. */
while (bit > num)
bit >>= 2;
while (bit != 0) {
if (num >= res + bit) {
num -= res + bit;
res = (res >> 1) + bit;
} else
res >>= 1;
bit >>= 2;
}
return res;
}
#endif
/* DMax one time init */
void _DMax_OneTimeInit(VL6180Dev_t dev)
{
_DMaxData(ambTuningWindowFactor_K) = DEF_AMBIENT_TUNING;
}
static uint32_t _DMax_RawValueAtRateKCps(VL6180Dev_t dev, int32_t rate)
{
uint32_t snrLimit_K;
int32_t DMaxSq;
uint32_t RawDMax;
DMaxFix_t retSignalAt400mm;
uint32_t ambTuningWindowFactor_K;
ambTuningWindowFactor_K = _DMaxData(ambTuningWindowFactor_K);
snrLimit_K = _DMaxData(snrLimit_K);
retSignalAt400mm = _DMaxData(retSignalAt400mm);
/* 12 to 18 bits Kcps */
if (rate > 0) {
DMaxSq = 400 * 400 * 1000 / rate - (400 * 400 / 330);
/* K of (1/RtnAmb -1/330 )=> 30bit- (12-18)bit => 12-18 bits*/
if (DMaxSq <= 0) {
RawDMax = 0;
} else {
/* value can be more 32 bit so base on raneg apply
* retSignalAt400mm before or after division to presevr accuracy */
if (DMaxSq < (2 << 12)) {
DMaxSq = DMaxSq * retSignalAt400mm /
(snrLimit_K + ambTuningWindowFactor_K);
/* max 12 + 12 to 18 -10 => 12-26 bit */
} else {
DMaxSq = DMaxSq / (snrLimit_K + ambTuningWindowFactor_K) * retSignalAt400mm;
/* 12 to 18 -10 + 12 to 18 *=> 12-26 bit */
}
RawDMax = VL6180_SqrtUint32(DMaxSq);
}
} else {
RawDMax = 0x7FFFFFFF; /* bigest possibmle 32bit signed value */
}
return RawDMax;
}
/*
* fetch static data from register to avoid re-read
* precompute all intermediate constant and cliipings
*
* to be re-used/call on changes of :
* 0x2A
* SYSRANGE_MAX_AMBIENT_LEVEL_MULT
* Dev Data XtalkComRate_KCPs
* SYSRANGE_MAX_CONVERGENCE_TIME
* SYSRANGE_RANGE_CHECK_ENABLES mask RANGE_CHECK_RANGE_ENABLE_MASK
* range 0xb8-0xbb (0xbb)
*/
static int _DMax_InitData(VL6180Dev_t dev)
{
int status, warning;
uint8_t u8;
uint16_t u16;
uint32_t u32;
uint32_t Reg2A_KCps;
uint32_t RegB8;
uint8_t MaxConvTime;
uint32_t XTalkCompRate_KCps;
uint32_t RangeIgnoreThreshold;
int32_t minSignalNeeded;
uint8_t SysRangeCheckEn;
uint8_t snrLimit;
static const int ROMABLE_DATA MaxConvTimeAdjust = -4;
warning = 0;
LOG_FUNCTION_START("");
do {
status = VL6180_RdByte(dev, 0x02A, &u8);
if (status) {
break;
}
if (u8 == 0) {
warning = CALIBRATION_WARNING;
u8 = 40; /* use a default average value */
}
Reg2A_KCps = Fix7_2_KCPs(u8); /* convert to KCPs */
status = VL6180_RdByte(dev, SYSRANGE_RANGE_CHECK_ENABLES, &SysRangeCheckEn);
if (status) {
break;
}
status = VL6180_RdByte(dev, SYSRANGE_MAX_CONVERGENCE_TIME, &MaxConvTime);
if (status) {
break;
}
status = VL6180_RdDWord(dev, 0x0B8, &RegB8);
if (status) {
break;
}
status = VL6180_RdByte(dev, SYSRANGE_MAX_AMBIENT_LEVEL_MULT, &snrLimit);
if (status) {
break;
}
_DMaxData(snrLimit_K) = (int32_t)16 * 1000 / snrLimit;
XTalkCompRate_KCps = VL6180DevDataGet(dev, XTalkCompRate_KCps);
if (Reg2A_KCps >= XTalkCompRate_KCps) {
_DMaxData(retSignalAt400mm) = Reg2A_KCps;
} else{
_DMaxData(retSignalAt400mm) = 0;
/* Reg2A_K - XTalkCompRate_KCp <0 is invalid */
}
/* if xtalk range check is off omit it in snr clipping */
if (SysRangeCheckEn&RANGE_CHECK_RANGE_ENABLE_MASK) {
status = VL6180_RdWord(dev, SYSRANGE_RANGE_IGNORE_THRESHOLD, &u16);
if (status) {
break;
}
RangeIgnoreThreshold = Fix7_2_KCPs(u16);
} else{
RangeIgnoreThreshold = 0;
}
minSignalNeeded = (RegB8 * 256) / ((int32_t)MaxConvTime + (int32_t)MaxConvTimeAdjust);
/* KCps 8+8 bit -(1 to 6 bit) => 15-10 bit */
/* minSignalNeeded = max ( minSignalNeeded, RangeIgnoreThreshold - XTalkCompRate_KCps) */
if (minSignalNeeded <= (int32_t)RangeIgnoreThreshold - (int32_t)XTalkCompRate_KCps)
minSignalNeeded = RangeIgnoreThreshold - XTalkCompRate_KCps;
u32 = (minSignalNeeded*(uint32_t)snrLimit) / 16;
_DMaxData(ClipSnrLimit) = _DMax_RawValueAtRateKCps(dev, u32);
/* clip to dmax to min signal snr limit rate*/
} while (0);
if (!status)
status = warning;
LOG_FUNCTION_END(status);
return status;
}
static int _DMax_Compute(VL6180Dev_t dev, VL6180_RangeData_t *pRange)
{
uint32_t rtnAmbRate;
int32_t DMax;
int scaling;
uint16_t HwLimitAtScale;
static const uint32_t ROMABLE_DATA rtnAmbLowLimit_KCps = 330 * 1000;
rtnAmbRate = pRange->rtnAmbRate;
if (rtnAmbRate < rtnAmbLowLimit_KCps) {
DMax = _DMax_RawValueAtRateKCps(dev, rtnAmbRate);
scaling = _GetUpscale(dev);
HwLimitAtScale = UpperLimitLookUP[scaling - 1];
if (DMax > _DMaxData(ClipSnrLimit)) {
DMax = _DMaxData(ClipSnrLimit);
}
if (DMax > HwLimitAtScale) {
DMax = HwLimitAtScale;
}
pRange->DMax = DMax;
} else {
pRange->DMax = 0;
}
return 0;
}
#undef _DMaxData
#undef Fix7_2_KCPs
#endif /* VL6180_HAVE_DMAX_RANGING */
Reference in New Issue View Git Blame Copy Permalink